BCM54618E

Single-Port GMII/MII Copper Gigabit/EEE GbE Transceiver

Currently Viewing:

Triple-speed 1000BASE-T/100BASE-TX/10BASE-T Energy Efficient Ethernet (IEEE 802.3az) Gigabit (GbE) transceiver integrated into a single monolithic CMOS chip.
 
The device performs all physical-layer functions for 1000BASE-T, 100BASE-TX and 10BASE-T Ethernet on standard Category 5 unshielded twisted-pair (UTP) cable. 10BASE-T can also run on standard Category 3, 4 and 5 UTP. The BCM54618E is based on the proven digital signal processor (DSP) technology from Broadcom, combining digital adaptive equalizers, ADCs, phase locked loops, line drivers, encoders, decoders, echo cancellers, crosstalk cancellers and all other required support circuitry integrated into a single chip. With full compliance to Energy Efficient Ethernet (IEEE 802.3az) standard, the BCM54618E substantially lower power consumption during periods of low-link utilization. In addition, with Broadcom's AutogrEEEn® technology, the BCM54618E can be in EEE mode when interfacing with non-EEE enabled MACs, allowing system designers to take advantage of EEE technology and realize power savings today. This power savings translates to lower energy costs for organizations that deploy networking equipment using the BCM54618E with EEE and AutogrEEEn technology. The BCM54618E is designed to be fully compliant with GMII and MII interface specifications, allowing compatibility with industry-standard Ethernet MACs and switch controllers. Designed for reliable operation over worst-case Category 5 cable, the BCM54618E automatically negotiates with its link partner to determine the highest possible operating speed. The device detects and corrects most common wiring problems. The BCM54618E features CableChecker™ diagnostics, which detects common cable problems including shorts, opens and cable length.
 

Features

  • Single-chip integrated triple-speed Energy Efficient Ethernet Gigabit transceiver. Support for the following copper line interfaces: 1000BASE-T IEEE 802.3ab, 100BASE-TX IEEE 802.3u, and 10BASE-T IEEE 802.3
  • Supports GMII, MII MAC interface
  • IEEE 802.3az-compliant support — support for native EEE MACS — support for Not Recommended for New Design non-EEE MAC using AutogrEEEn mode

Lifecycle Status

Active

Specification Value
Lifecycle Active
Distrib. Inventory No

BCM82109

28nm Octal 25G/28G Unidirectional Repeater

BCM82181

28nm Octal 25G/28G Bidirectional Repeater