Single-Port GMII/MII Copper Gigabit/ EEE/IEEE1588v2 GbE Transceiver
Triple-speed 1000BASE-T/100BASE-TX/10BASE-T Energy Efficient Ethernet (IEEE 802.3az) Gigabit (GbE) transceiver integrated into a single monolithic CMOS chip.
The device performs all physical-layer functions for 1000BASE-T, 100BASE-TX and 10BASE-T Ethernet on standard Category 5 unshielded twisted-pair (UTP) cable. 10BASE-T can also run on standard Category 3, 4 and 5 UTP. The BCM54619E is based on the proven digital signal processor (DSP) technology from Broadcom, combining digital adaptive equalizers, ADCs, phase locked loops, line drivers, encoders, decoders, echo cancellers, crosstalk cancellers and all other required support circuitry integrated into a single chip. With full compliance to Energy Efficient Ethernet (IEEE 802.3az) standard, the BCM54619E substantially lowers power consumption during periods of low-link utilization. In addition, with Broadcom's AutogrEEEn® technology, the BCM54619E can be in EEE mode when interfacing with non-EEE-enabled MACs, allowing system designers to take advantage of EEE technology and realize power savings today. This power savings translates to lower energy costs for organizations that deploy networking equipment using the BCM54619E with EEE and AutogrEEEn technology. For application that require precise and accurate synchronization of nodes in the network, the BCM54619E includes support for 1588 Precision Time Protocol (PTP) and is fully compliant to IEEE 1588-2008 (version 2) standard. The BCM54619E is designed to be fully compliant with GMII and MII interface specifications, allowing compatibility with industry-standard Ethernet MACs and switch controllers. Designed for reliable operation over worst-case Category 5 cable, the BCM54619E automatically negotiates with its link partner to determine the highest possible operating speed. The device detects and corrects most common wiring problems. The BCM54619E features CableChecker™ diagnostics, which detects common cable problems including shorts, opens and cable length.
- Single-chip integrated triple-speed Energy Efficient Ethernet Gigabit transceiver. Support for the following copper line interfaces: 1000BASE-T IEEE 802.3ab, 100BASE-TX IEEE 802.3u and 10BASE-T IEEE 802.3
- Supports GMII, MII MAC interface
- IEEE 802.3az-compliant support — support for native EEE MACS — support for Not Recommended for New Design non-EEE MAC using AutogrEEEn mode
- Support for IEEE Standard 1588-2008 (version 2)
- Synchronous Ethernet support