BCM53134

Six-Port Ultra-Low Power Gigabit Ethernet Switch

Currently Viewing:

The BCM53134 is Broadcom's lowest power consumption integrated Ethernet switch for next-generation Home Gateway, SOHO/SMB and wireless router applications. Building on the industry-leading 28 nm RoboSwitch™ architecture, the BCM53134 allows customers to significantly reduce power consumption of existing designs, while delivering higher performance to meet the growing bandwidth demands in the home and SOHO/SMB environments.
 
The BCM53134 supports an advanced suit of features required by top tier service providers for home and SOHO/SMB gateways, especially in areas of VLAN bridging, QoS and Access-List classification. In the area of QoS, for example, the device supports six selectable classes of service per port, plus two additional time-sensitive classes. It supports Port based, IEEE 802.1P, TOS and DSCP-based CoS mapping. It supports SP, WRR and WDRR scheduling (and mix of the three) and it supports both ingress and egress rate control (a.k.a. metering and shaping).

Features

  • 4xGPHY integrated, 1xRGMII and 1xRGMII/SGMII+ (1G/2.5 Gb/s) interfaces
  • Cost-effective, Ultra low power (green power saving modes supported), smart-managed Gigabit switch with Integrated on-chip 8051
  • microcontroller for
  • Advanced bridging with
  • 4K MAC Table (also-known- as FDB, ARL or Learning tables)
  • 802.1q vlan bridging
  • Port based Vlan filtering
  • 802.1ad (QinQ)
  • Up to 8 spanning trees
  • 128 multicast groups
  • Advanced QoS features with
  • 8 queues per port (2 dedicated for time sensitive applications)
  • IEEE 802.1p, MAC Port, TOS, and DiffServ Class-Of- Service mapping
  • SP, WRR, WDRR scheduling and combinations of the three
  • RED/WRED and tail-drop congestion avoidance mechanisms
  • Rate control protecting against traffic flooding of unknown unicasts/broadcasts/
  • Advanced Compact Field Processor (CFP)
  • 128 CFP rules
  • L1 to L4 filtering (physical ports to TCP/UDP ports)
  • Advanced Two-Rate Three Color Metering (compliant with RFC2698, RFC 4115 and MEF 10.2)
  • Broadsync™ HD for IEEE 802.1AS support
  • Two dedicated queues for time sensitive traffic
  • Time stamping ingress and egress CPU generated frames
  • Time slot transmission received for Broadsync traffic.

Applications

  • Broadband Access Devices

Active

Specification Value
Lifecycle Active
Distrib. Inventory Yes

BCM82109

28nm Octal 25G/28G Unidirectional Repeater