Four Character Smart Alphanumeric Displays
These are 3.7 mm (0.145 inch) four character 5 x 7 dot matrix displays driven by an on-board CMOS IC. These displays are pin for pin compatible with the HPDL-1414. The IC stores and decodes 7-bit ASCII data and displays it in an easy to read 5 x 7 font. Multiplexing and LED drive circuitry is also included in the display, and fast setup and hold times allow it to interface easily with common microprocessors.
The address and data inputs can be directly connected to microprocessor address and data buses.
The HDLU-1414 offers a larger character set than the HPDL-1414. Lower case letters and special symbols are now offered, made possible by the 5 x 7 dot matrix character layout. The difference between the sunlight viewable HDLS-1414 and the low power HDLU-1414 lies in the brightness level. The sunlight viewable version is internally set to provide high intensity characters. The low power version uses the same bright LED technology, but reduces the current through each LED to a much lower level, and maintains an intensity comparable to the HDLO-1414.
- Enhanced Drop-in Replacement to HPDL-1414
- Smart Alphanumeric Display Built-in RAM, ASCII Decoder, and LED Drive Circuitry
- 128 ASCII Character Set
- End Stackable
- Categorized for Luminous Intensity
- Wide Viewing Angle (500 typ)
|Character Height In Mm||3.61|
|Minimum Luminous Intensity (mcd)||1.2|
|Number of Character/Digits||4.0|
|Test Current (mA)||34.0|
|Typical Dominant Wavelength (nm)||637|
|Typical Luminous Intensity (mcd)||3.1|