HLMA-PL00-PRR11

Subminiature High Performance AlInGaP LED Lamps

Currently Viewing:

Flat Top Package
The HLMA-PL00 flat top lamps use an untinted, nondiffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top lamps are also ideal for use as emitters in light pipe applications.

Lead Configurations
All of these devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. For more infor-mation refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet.

Technology
These subminiature solid state lamps utilize the newly developed aluminum indium gallium phosphide (AlInGaP) LED technologies, the absorbing substrate carrier technology (AS = HLMA-Devices)

Features

  • Subminiature Flat Top Package
    Ideal for Backlighting and Light Piping Applications
  • Wide Range of Drive Currents
  • Color: 590 nm Amber
  • Ideal for Space Limited Applications
  • Axial Leads
  • Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel

Lifecycle Status

Active

Substance Compliance

  • RoHS6
    Fully Compliant
Specification Value
Lifecycle Active
Distrib. Inventory Yes
Samples Available Yes
Color Amber
Color Bin Selection 2
Dimension Lxwxh In Mm 2.2 x 2.1 x 2.2
Intensity Bin Selection 3
Lead Bend Configuration Gull Wing
RoHS6 Compliant Y
Led Chip Type AS-AlInGaP
Lens Type Flat_top-clear-non_tinted
Max Dominant Wavelength In Nm 586.5
Max Qty of Samples 20
Min Dominant Wavelength In Nm 586.5
Minimum Luminous Intensity (mcd) 40.0
Peak Output Current Min Uom 2a
Mounting Direction Top
Mounting Method Surface Mount
Number Of Colors Single
Operating Temperature Range -40°C to +100°C
Package Flat Top Subminiature
Test Current (mA) 20.0
Typical Forward Voltage In V 1.9 V @ 20 mA
Typical Dominant Wavelength (nm) 590
Typical Luminous Intensity (mcd) 75
Viewing Angle (degree) 125

Application Brief5 i
Application Note3 i
Data Sheet2 i
Product Change Notice (PCN)4 i
Reliability Data Sheet1 i