HLMT-QL00

Subminiature High Performance AlInGaP LED Lamps

Currently Viewing:

Dome Packages
The HLMT-QL00 dome lamps use an untinted, nondiffused lens to provide a high luminous intensity within a narrow radiation pattern.

Lead Configurations
All of these devices are made by encapsulating LED chips on axial lead frames to form molded epoxy subminiature lamp packages. A variety of package configuration options is available. These include special surface mount lead configurations, gull wing, yoke lead, or Z-bend. Right angle lead bends at 2.54 mm (0.100 inch) and 5.08 mm (0.200 inch) center spacing are available for through hole mounting. For more information refer to Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps data sheet.

Technology
These subminiature solid state lamps utilize the newly developed aluminum indium gallium phosphide (AlInGaP) LED technologies the transparent substrate carrier technology (TS = HLMT-Devices). The TS HLMT-Devices are especially effective in very bright ambient lighting conditions.

Features

  • Subminiature Dome Package
    Nondiffused Dome for High Brightness
  • Wide Range of Drive Currents
  • Color: 590 nm Amber
  • Ideal for Space Limited Applications
  • Axial Leads
  • Available with Lead Configurations for Surface Mount and Through Hole PC Board Mounting

Lifecycle Status

Active

Substance Compliance

  • RoHS6
    Fully Compliant
Specification Value
Lifecycle Active
Distrib. Inventory Yes
Samples Available Yes
Color Amber
Color Bin Selection Open
Dimension Lxwxh In Mm 2.2 x 2.1 x 2.9
Intensity Bin Selection Open
RoHS6 Compliant Y
Led Chip Type TS-AlInGaP
Lens Type Domed-clear-non_tinted
Max Qty of Samples 20
Minimum Luminous Intensity (mcd) 300.0
Number Of Colors Single
Operating Temperature Range -40°C to +100°C
Package Domed Subminiature
Test Current (mA) 20.0
Typical Forward Voltage In V 2.0 V @ 20 mA
Typical Dominant Wavelength (nm) 590
Typical Luminous Intensity (mcd) 1000
Viewing Angle (degree) 15

Application Brief5 i
Application Note3 i
Data Sheet2 i
Product Change Notice (PCN)2 i
Reliability Data Sheet1 i