High Brightness PLCC-4 Tricolor LED

Currently Viewing:

This family of SMT LEDs are in PLCC-4 package with common anode pin. The full black plastic housing with white inner reflector provides good contrast without compromising brightness. A typical viewing angle of 110° together with the built in reflector drives up the intensity of light output making these LEDs suitable for use in interior electronics signs.
These LEDs are compatible with reflow soldering process. For easy pick & place, the LEDs are shipped in tape and reel. Every reel is shipped from a single intensity and color bin except red color for better uniformity.


  • PLCC-4 package (Plastic Leaded Chip Carrier)
  • LED package with diffused silicone encapsulation
  • High brightness using AlInGaP and InGaN dice technologies
  • Typical viewing angle at 110°
  • Compatible with reflow soldering process
  • Good contrast with black body and diffused encapsulation


  • Indoor full color display

Lifecycle Status


Substance Compliance

  • RoHS6
    Fully Compliant
Specification Value
Lifecycle Active
Distrib. Inventory Yes
Color Red, Green & Blue
Dimension Lxwxh In Mm 3.5 x 2.8 x 1.9
RoHS6 Compliant Y
Number Of Colors Tricolor
Operating Temperature Range -40°C to +110°C
Package Tape and Reel
Typical Dominant Wavelength (nm) 622 (Red), 529 (Green), 469 (Blue)
Typical Luminous Intensity (mcd) 630 (Red), 1500 (Green), 350 (Blue)
Viewing Angle (degree) 110°
Application Note4 i
Data Sheet2 i
Reliability Data Sheet1 i