High Brightness Tricolor PLCC-6 Black Body LED

Currently Viewing:

The high brightness black top surface tri-color PLCC-6 family of SMT LEDs has a separate heat path for each LED dice, enabling the LED to be driven at higher current. These SMT LEDs are in the high brightness category, are high reliability devices, are high performance and are designed for a wide range of environmental conditions. By integrating the black top surface Broadcom devices deliver better contrast enhancement for your application. They also provide super wide viewing angle at 120° with the built in reflector pushing up the intensity of the light output. The high reliability characteristics and other features make the black top surface tri-color PLCC-6 family ideally suitable for exterior and interior full color signs application conditions.

For easy pick & place, the LEDs are shipped in EIA-compliant tape and reel. Every reel is shipped from a single intensity and color bin; except red color providing better uniformity. These tri-color LEDs are compatible with reflow soldering process.



  • Industry Standard PLCC-6 package (Plastic Leaded Chip Carrier) with individual addressable pin-out for higher flexibility of driving configuration
  • High reliability LED package with silicone encapsulation
  • High brightness using AlInGaP and InGaN dice technologies
  • Wide viewing angle at 120°
  • Compatible with reflow soldering process
  • JEDEC MSL 2a
  • Water-Resistant (IPX6*) per IEC 60529:2001


  • Indoor full color display

Lifecycle Status


Substance Compliance

  • RoHS6
    Fully Compliant
Specification Value
Lifecycle Active
Distrib. Inventory Yes
Color Red, Green & Blue
Dimension Lxwxh In Mm 3.40 x 2.80 x 1.80
RoHS6 Compliant Y
Operating Temperature Range -40°C to +110°C
Package Tape and Reel
Typical Dominant Wavelength (nm) 622 (Red), 530 (Green), 470 (Blue)
Typical Luminous Intensity (mcd) 450 (Red), 560 (Green), 180 (Blue)
Viewing Angle (degree) 120°