Hermetically Sealed 3.3V, Low IF, Wide Vcc, High Gain Optocouplers
The DSCC Standard Microcircuit Drawing 5962-0822703HUA is a high reliability Class H four channel hermetically sealed 3.3V optocoupler in a 16-Pin ceramic DIP package with surface mountable butt cut leads that are solder dipped. The solder contains lead. Gold plated leads and various lead form options are also available. See the datasheet for details.
The product is capable of operation and storage over the full mil temp range and may also be purchased in a commercial grade or with full MIL-PRF-38534 K level testing. The device is manufactured and tested on a MIL-PRF-38534 certified line and Class H and K versions are included in the DSCC Qualified Products Database Supplemental Sheets QPDSIS-38534 as Hybrid Microcircuits.
Each channel contains a GaAsP light emitting diode which is optically coupled to an integrated high gain photon detector. The high gain output stage features an open collector output providing both lower saturation voltage and higher signaling speed than possible with conventional photo-Darlington optocouplers.
The supply voltage can be operated as low as 3.0 V without adversely affecting the parametric performance. These devices have a 300% minimum CTR at an input current of only 0.5 mA making them ideal for use in low input current applications such as MOS, CMOS, low power logic interfaces or line receivers.
Package styles available for this die set with one, two or for channels are 8 and 16-Pin DIP through hole. All devices may be purchased with a variety of lead forms and plating options. See datasheet for details.
Because the same electrical die (emitters and detectors) are used for each channel of each device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities give justification for the use of data obtained from one part to represent other parts performance for reliability.
- High reliability Class H, Four Channel, 16-Pin DIP
- Performance Guaranteed from -55oC to 125o C
- MIL-PRF-38534 Class K Available
- Three Hermetically Sealed Package Configurations Available
- One and Two Channel Devices Available (different package)
- Low Power Consumption
- 3.3V Supply Voltages
- Low Input Current Requirement: 0.5 mA
- High Current Transfer Ratio: 1500% Typical @ IF = 0.5 mA
- Low Output Saturation Voltage: 0.11 V Typical
- 1500 Vdc Withstand Test Voltage
- Military and Aerospace
- High Reliability Systems
- Transportation, Medical, and Life Critical Systems
- Telephone Ring Detection
- Microprocessor System Interface
- EIA RS-232-C Line Receiver
- Voltage Level Shifting
- Isolated Input Line Receiver
- Isolated Output Line Driver
- Logic Ground Isolation
- Current Loop Receiver
- System Test Equipment Isolation
- Process Control Input/Output Isolation
- Harsh Industrial Environments
|CMR (min.) (V/µs)||1000.0|
|CTR Min. (%)||300.0|
|IF Min. (mA)||0.5|
|Input Current Ma Uom||mA|
|Package||Hermetic 16 Pin DIP|
|Product Type||Hermetic High Gain|
|Prop Delay (tPHL) Max. (µs)||100.0|
|Prop Delay tPHL Uom||µs|
|Prop Delay (tPLH) Max. (µs)||60.0|
|Prop Delay tPLH Uom||µs|
|Reliability Class||MIL-PRF-38534 Class H|
|Data Rate||100 Kb/s|
|Prop Delay (tPHL) Max. (µs)||100.0 µs|
|Prop Delay (tPLH) Max. (µs)||60.0 µs|
|IF Min. (mA)||0.5 mA|