HCPL-5631

Hermetically Sealed, High Speed, High CMR, Logic Gate Optocouplers

Currently Viewing:

The HCPL-5631 is a high reliability Class H two channel hermetically sealed optocoupler in an 8-Pin ceramic DIP package with gold plated leads. Solder dipped leads and various lead form options are also available. See the datasheet for details.

The product is capable of operation and storage over the full military temperature range and may also be purchased as either commercial grade or with full MIL-PRF-38534 Class Level K testing or from the appropriate DSCC Drawing(81028 for the Class H, 5962-98001 for the Class K). All devices are manufactured and tested on a MIL-PRF-38534 certified line and the Class H and K versions are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits. Quad channel devices are available by special order in the 16-Pin DIP through-hole packages.

Each channel contains a GaAsP light emitting diode which is optically coupled to an integrated high speed photon detector. The output of the detector is an open collector Schottky clamped transistor. Internal shields provide a guaranteed common mode transient immunity specification of 1000 V/micro-second. For Isolation Voltage applications requiring up to 2500 Vdc, the HCPL-5650 family is also available. Package styles for this die set in one, two, or four channels are 8 and 16-Pin DIP through hole, 16-Pin surface mount DIP flat pack, and 20 pad Leadless Ceramic Chip Carrier. Most devices may be purchased with a variety of lead forms and plating options. See the datasheet for details.

Because the same electrical die (emitters and detectors) are used for each channel of each device listed in the datasheet, absolute maximum ratings, recommended operating conditions, electrical specifications, and performance characteristics shown in the datasheet figures are virtually identical for all parts. Occasional exceptions exist due to package variations and limitations and are as noted. Additionally, the same package assembly processes and materials are used in all devices. These similarities give justification for the use of data obtained from one part to represent other parts performance for reliability and certain limited radiation test results.

Features

  • High Reliability, Two Channel, 8-Pin DIP
  • Performance Guaranteed from -55 degrees to 125 degrees C
  • MIL-PRF-38534 Class H, QML-38534
  • Dual Marked with Device Part Number and DSCC Standard Microcircuit Drawing
  • High Radiation Immunity
  • Reliability Data
  • MIL-PRF-38534 Class K Available
  • Five Hermetically Sealed Package Configurations Available
  • One and Four Channel Devices Available (may be different package)
  • 2500 Vdc Withstand Test Voltage Device Available (HCPL-5651)
  • TTL Circuit Compatibility
  • High Speed: 10MBd
  • CMR: >10,000 V/micro-second Typical
  • 1500 Vdc Withstand Test Voltage

Applications

  • Military and Aerospace
  • High Reliability Systems
  • Transportation, Medical, and Life Critical Systems
  • Line Receiver
  • Voltage Level Shifting
  • Isolated Input Line Receiver
  • Isolated Output Line Driver
  • Logic Ground Isolation
  • Harsh Industrial Environments
  • Isolation for Computer, Communications, and Test Equipment Systems

Lifecycle Status

Active

Substance Compliance

  • RoHS6
    Fully Compliant
Specification Value
Lifecycle Active
Distrib. Inventory Yes
Samples Available No
CMR (min.) (V/µs) 10000.0
CTR Min. (%) 100.0
IF Min. (mA) 10.0
Input Current Ma Uom mA
RoHS6 Compliant Y
Package Hermetic 8 Pin DIP
Product Type Hermetic High Speed Logic Gate
Prop Delay (tPHL) Max. (µs) 100.0
Prop Delay tPHL Uom ns
Prop Delay (tPLH) Max. (µs) 100.0
Prop Delay tPLH Uom ns
Reliability Class MIL-PRF-38534 Class H
Data Rate Mb/s
No. of Channels 2
VDD2 (V) 4.5
Data Rate 10 Mb/s
Prop Delay (tPHL) Max. (µs) 100.0 ns
Prop Delay (tPLH) Max. (µs) 100.0 ns
IF Min. (mA) 10.0 mA

Application Note3 i
Design Guide1 i
Product Change Notice (PCN)3 i
Regulatory Certificate1 i
Reliability Data Sheet1 i
Technical Specification1 i
White Papers1 i