---
title: Knowledge Base
url: https://www.broadcom.com/support/knowledgebase/1211161469026/top-megaraid-solutions
description: Common MegaRAID Solutions/FAQ
---

# Knowledge Base

## [Create a Request](https://www.broadcom.com/support/request-tech-support?fct=Support&pf=RAID+Controller+Cards&fc=United+States)

### Question
What are the top issues and solutions for the DCSG product line?

### Answer
**Common solutions for MegaRAID, HBA and Ethernet controllers**

|  |
| --- |
| **MegaRAID controller issues** |
| **Upgrading controller from an older RAID model to new causes BSOD**<br>[Installing a device driver before Windows starts with Acronis Universal Restore](https://www.broadcom.com/support/knowledgebase/1211187925892/upgrading-controller-causes-windows-blue-screen-) [Flashing MegaRAID controllers](https://www.broadcom.com/support/knowledgebase/1211161498288/what-do-i-need-to-do-to-upgrade-the-firmware-on-my-lsi-megaraid-) |
|  |
| **WebBIOS will not load or is skipped after Ctrl + H**<br>[Error Baseport not responding](https://www.broadcom.com/support/knowledgebase/1211161501190/lsisas2208-based-raid-controller-adapter-at-baseport-is-not-resp) [BIOS halts during POST with an error stating the controller is in SafeMode](https://www.broadcom.com/support/knowledgebase/1211161503828/why-is-megaraid-logging-that-it-is-running-in-safe-mode) [BIOS message shows at POST but ctrl h key is ignored](https://www.broadcom.com/support/knowledgebase/1211161498310/i-have-an-asrock-z68-chipset-motherboard-and-i-cannot-get-into-t) [WebBIOS is skipped-workaround](https://www.broadcom.com/support/knowledgebase/1211161500948/unable-to-enter-megaraid-bios-webbios-configuration-utility-usin) [Intel Motherboard- ctrl h does not work](https://www.broadcom.com/support/knowledgebase/1211161500507/intel-s2600t-mr-9271-8i-ctrlh-does-not-work) [WebBIOS takes a long time to load. Once it loads, drives are listed in yellow and blue](https://www.broadcom.com/support/knowledgebase/1211161504048/what-do-the-colors-in-webbios-stand-for) |
| **Unable to Boot, set boot devices, no virtual drive handled by BIOS message**<br>[Unable to boot after creating a virtual drive](https://www.broadcom.com/support/knowledgebase/1211161454612/i-have-installed-a-new-hardware-raid-card-and-now-i-cant-boot-an) [Using native 4k Advanced format drives](https://www.broadcom.com/support/knowledgebase/1211161500309/advanced-format---4k---512e-disk-drive-support-on-lsi-raid-contr) [Unable to see boot devices in motherboard BIOS](https://www.broadcom.com/support/knowledgebase/1211161481275/set-boot-array-from-a-controller-having-multiple-arrays) [Windows spontaneously reboots shortly after turning on the system](https://www.broadcom.com/support/knowledgebase/1211169848029/after-windows-update,-my-system-restarts-in-a-loop) [I had to replace my old MegaRAID controller with a new one and Now Windows Blue screens](https://www.broadcom.com/support/knowledgebase/1211169848782/migrating-windows-on-a-virtual-drive-to-a-different-controller) [0 virtual drives handled by BIOS – Unable to install OS](https://www.broadcom.com/support/knowledgebase/1211161504004/booting-from-a-virtual-drive-vd-that-uses-4k-drives-with-megarai) |
| **Array is offline, or listed as access blocked**<br>[CacheCade failed, Unit access to virtual drive is blocked](https://www.broadcom.com/support/knowledgebase/1211161504716/cannot-use-cachecade-cachecade-is-blocked) [Drives are being listed as unconfigured bad](https://www.broadcom.com/support/knowledgebase/1211161503476/virtual-drive-has-all-drive-members-listed-as-unconfigured-bad) [Updating firmware caused SSD Cachecade volume to become foreign](https://www.broadcom.com/support/knowledgebase/1211161498618/upgrading-firmware-on-9260-9280-clears-the-cachecade-pro-20-soft) |
| **Cannot create RAID 10**<br>[Creating RAID 10, 50 an 60](https://www.broadcom.com/support/knowledgebase/1211161503234/how-to-create-a-raid-10-50-or-60) [RAID 10 is not an option](https://www.broadcom.com/support/knowledgebase/1211161502794/i-do-not-see-raid-10-in-webbios-when-i-try-to-create-an-array) |
| **Import foreign configuration failed after controller was replaced**<br>[I deleted my array / failed to import](https://www.broadcom.com/support/knowledgebase/1211161498332/unable-to-import-foreign-configuration---deleted-my-megaraid-arr) [Troubleshooting offline arrays](https://www.broadcom.com/support/knowledgebase/1211161501519/offline-array-troubleshooting-for-megaraid-and-3ware) |
| **Cannot create SafeStore encrypted volume or CacheCade volume**<br>[Drive is encryption capable and I have a license key for SafeStore](https://www.broadcom.com/support/knowledgebase/1211161504180/compatible-sed-self-encrypting-drives-with-lsi-safestore-for-fde) [Cannot enable drive encryption or CacheCade](https://www.broadcom.com/support/knowledgebase/1211161499936/activating-lsi-advanced-software-options) [Compatibility list for gen 2 drive encryption](https://www.broadcom.com/support/knowledgebase/1211161497914/lsi-megaraid-safestore-support-for-sas-and-sata-drives) |
| **Unable to create RAID 5 or 6, need activation key**<br>[RAID 5 and 6 are not an option, only RAID 0, 1 and 10](https://www.broadcom.com/support/knowledgebase/1211161493172/unable-to-create-a-raid-5-with-8204elp-8208elp-8204xlp-8208xlp) |
| **Unable to expand my drive group. It is greyed out**<br>[Drive modification cannot always be done on all configurations](https://www.broadcom.com/support/knowledgebase/1211161503168/how-to-expand-an-array-on-megaraid-controllers-adding-drives-to-) |
| **Battery Backup error messages**<br>[Battery error during first boot](https://www.broadcom.com/support/knowledgebase/1211161504400/battery-hardware-missing-error-message-at-first-boot) |

**LSA LSI storage authority monitoring software**

**Hard disk and Solid State Drive issues**

- Drives dropping from RAID
  - [Can a failed drive be replicated and reinserted into a virtual drive?](https://www.broadcom.com/support/knowledgebase/0/can-a-failing-drive-be-cloned-out-of-an-array-my-drive-keeps-failing-making-my-array-go-offline.)
  - [Controller is overheating causing resets.](https://www.broadcom.com/support/knowledgebase/1211258248175/controller-is-overheating) 
  - [I have replaced the failed drive, but it still says the drive is missing.](https://docs.broadcom.com/support/knowledgebase/0/i-have-replaced-the-failed-drive,-but-it-still-says-the-drive-is-missing) 
  - [Drive drops from the virtual drive after receiving SCSI sense error.](https://www.broadcom.com/support/knowledgebase/1211161495572/with-new-megaraid-firmware-error-unexpected-sense---invalid-fiel) 
  - [Unable to initiate secure erase on FDE-SED capable drives.](https://www.broadcom.com/support/knowledgebase/1211161494340/unable-to-initiate-secure-erase-on-fde-sed-capable-drives) 

- Drives resetting
  - [Random power on resets occurring.](https://www.broadcom.com/support/knowledgebase/1211161470676/drives-are-resetting-at-random-and-on-different-slots.) 
  - [1 drive is resetting constantly.](https://www.broadcom.com/support/knowledgebase/1211161473139/1-drive-is-resetting-constantly-) 

- Drives not detected or listed as unsupported:
  - [Unable to detect any drives on controller.](https://www.broadcom.com/support/knowledgebase/1211219781996/drives-are-not-detected-on-controller) 
  - [4k Native sector, advanced format drives.](https://www.broadcom.com/support/knowledgebase/1211161500309/advanced-format---4k---512e-disk-drive-support-on-lsi-raid-contr) 

- Drives reporting unexpected sense:
  - [SMART threshold exceeded.](https://www.broadcom.com/support/knowledgebase/1211161456372/smart-threshold-exceeded) 
  - [SCSI sense data and information.](https://www.broadcom.com/support/knowledgebase/1211161495572/with-new-megaraid-firmware-error-unexpected-sense---invalid-fiel) 
  - [Other error counter is increasing in Linux.](https://www.broadcom.com/support/knowledgebase/1211161495683/other-error-count-increasing-on-all-drives-simultaneously) 
  - [Smartmon error reporting.](https://www.broadcom.com/support/knowledgebase/1211161504870/i-installed-smartmontools-now-i-see-unknown-errors-in-the-event) 

- Drive identify not working, mapping incorrect:
  - [9265 Activity LED header J1A4 doesn't work.](https://www.broadcom.com/support/knowledgebase/1211161497289/9265-activity-led-header-j1a4-doesnt-work) 
  - [Identify drive in MegaRAID storage manager.](https://www.broadcom.com/support/knowledgebase/1211161497179/locate-and-identify-drives-in-an-enclosure-or-backplane-with-act) 
  - [All activity jumper block JT6B3 on 9750 and 9260.](https://www.broadcom.com/support/knowledgebase/1211161496431/all-activity-jumper-block-jt6b3-on-9750-and-9260) 
  - [SGPIO sideband cables needed for identify.](https://www.broadcom.com/support/knowledgebase/1211161504672/how-to-locate-drives-on-megaraid-and-hba-controllers) 
  - [Drive activity indicator.](https://www.broadcom.com/support/knowledgebase/1211161499146/activity-indicator-does-not-work-on-all-9240-9260-9265-9280-) 
  - [SGPIO / Sideband cables needed for identify.](https://www.broadcom.com/support/knowledgebase/1211161503608/sideband-cable-on-lsi-broadcom-cables) 
  - [Drive mapping IDs are out of order and keep changing.](https://www.broadcom.com/support/knowledgebase/1211161503520/direct-mode---persistant-mode---device-ids-on-megaraid) 

- Cannot create SSD CacheCade volume
  - [CacheCade is grayed out.](https://www.broadcom.com/support/knowledgebase/1211161500309/advanced-format---4k---512e-disk-drive-support-on-lsi-raid-contr) 

- Drive is listed as unconfigured bad or foreign.
  - [Offline array troubleshooting tips](https://www.broadcom.com/support/knowledgebase/1211161501519/offline-array-troubleshooting-for-megaraid-and-3ware) 
  - [Recovering after a multiple drive failure.](https://www.broadcom.com/support/knowledgebase/1211161490881/multidrive-failure-recovery-with-megaraid) 
  - [Drives are being listed as unconfigured bad.](https://www.broadcom.com/support/knowledgebase/1211161503476/virtual-drive-has-all-drive-members-listed-as-unconfigured-bad) 
  - [Forcing a drive from unconfigured bad to good.](https://www.broadcom.com/support/knowledgebase/1211161503278/one-disk-is-unconfigured-bad-how-can-i-set-it-to-unconfigured-go) 

- Slow rebuild
  - [Rebuild is taking a long time to complete.](http://www.broadcom.com/support/knowledgebase/1211257711004/slow-rebuild) 

- Unable to secure erase drive
  - [I have StoreSafe license key, but I cannot do a secure erase.](https://www.broadcom.com/support/knowledgebase/1211161494340/unable-to-initiate-secure-erase-on-fde-sed-capable-drives) 

- Resize smaller drives with larger drives
  - [Rebuild drives with larger disks.](https://www.broadcom.com/support/knowledgebase/1211161504246/changing-drives-from-smaller-capacity-to-larger-capacity-in-mega) 

- Unable to start expansion
  - [Modify drive group is not an option.](https://www.broadcom.com/support/knowledgebase/1211161497794/boot-volume---multiple-volumes-with-megaraid) 

- When creating a virtual drive, Data protection in not selectable
  - [Information about T1-10 PI data protection.](https://www.broadcom.com/support/knowledgebase/1211161502244/the-data-protection-feature---megaraid) 

**MegaRAID controller issues**

- [Installing a device driver before Windows starts with Acronis Universal Restore.](https://www.broadcom.com/support/knowledgebase/1211187925892/upgrading-controller-causes-windows-blue-screen-) 
- [Flashing MegaRAID controllers.](https://www.broadcom.com/support/knowledgebase/1211161498288/what-do-i-need-to-do-to-upgrade-the-firmware-on-my-lsi-megaraid-) 

**WebBIOS will not load or is skipped after Ctrl + H**
- [Error Baseport not responding.](https://www.broadcom.com/support/knowledgebase/1211161501190/lsisas2208-based-raid-controller-adapter-at-baseport-is-not-resp) 
- [BIOS halts during POST with an error stating the controller is in SafeMode.](https://www.broadcom.com/support/knowledgebase/1211161503828/why-is-megaraid-logging-that-it-is-running-in-safe-mode) 
- [BIOS message shows at POST but ctrl h key is ignored.](https://www.broadcom.com/support/knowledgebase/1211161498310/i-have-an-asrock-z68-chipset-motherboard-and-i-cannot-get-into-t) 
- [WebBIOS is skipped-workaround.](https://www.broadcom.com/support/knowledgebase/1211161500948/unable-to-enter-megaraid-bios-webbios-configuration-utility-usin) 
- [Intel Motherboard- ctrl h does not work.](https://www.broadcom.com/support/knowledgebase/1211161500507/intel-s2600t-mr-9271-8i-ctrlh-does-not-work) 
- [WebBIOS takes a long time to load. Once it loads, drives are listed in yellow and blue.](https://www.broadcom.com/support/knowledgebase/1211161504048/what-do-the-colors-in-webbios-stand-for) 

**Unable to Boot, set boot devices, no virtual drive handled by BIOS message**
- [Unable to boot after creating a virtual drive.](https://www.broadcom.com/support/knowledgebase/1211161454612/i-have-installed-a-new-hardware-raid-card-and-now-i-cant-boot-an) 
- [Using native 4k Advanced format drives.](https://www.broadcom.com/support/knowledgebase/1211161500309/advanced-format---4k---512e-disk-drive-support-on-lsi-raid-contr) 
- [Unable to see boot devices in motherboard BIOS.](https://www.broadcom.com/support/knowledgebase/1211161481275/set-boot-array-from-a-controller-having-multiple-arrays) 
- [Windows spontaneously reboots shortly after turning on the system.](https://www.broadcom.com/support/knowledgebase/1211169848029/after-windows-update,-my-system-restarts-in-a-loop) 
- [I had to replace my old MegaRAID controller with a new one and Now Windows Blue screens.](https://www.broadcom.com/support/knowledgebase/1211169848782/migrating-windows-on-a-virtual-drive-to-a-different-controller) 
- [0 virtual drives handled by BIOS – Unable to install OS.](https://www.broadcom.com/support/knowledgebase/1211161504004/booting-from-a-virtual-drive-vd-that-uses-4k-drives-with-megarai) 

**Array is offline, or listed as access blocked**
- [CacheCade failed, Unit access to virtual drive is blocked.](https://www.broadcom.com/support/knowledgebase/1211161504716/cannot-use-cachecade-cachecade-is-blocked) 
- [Drives are being listed as unconfigured bad.](https://www.broadcom.com/support/knowledgebase/1211161503476/virtual-drive-has-all-drive-members-listed-as-unconfigured-bad) 
- [Updating firmware caused SSD Cachecade volume to become foreign.](https://www.broadcom.com/support/knowledgebase/1211161498618/upgrading-firmware-on-9260-9280-clears-the-cachecade-pro-20-soft) 

**Cannot create RAID 10**
- [Creating RAID 10, 50 an 60.](https://www.broadcom.com/support/knowledgebase/1211161503234/how-to-create-a-raid-10-50-or-60) 
- [RAID 10 is not an option.](https://www.broadcom.com/support/knowledgebase/1211161502794/i-do-not-see-raid-10-in-webbios-when-i-try-to-create-an-array) 

**Import foreign configuration failed after controller was replaced**
- [I deleted my array / failed to import.](https://www.broadcom.com/support/knowledgebase/1211161498332/unable-to-import-foreign-configuration---deleted-my-megaraid-arr) 
- [Troubleshooting offline arrays.](https://www.broadcom.com/support/knowledgebase/1211161501519/offline-array-troubleshooting-for-megaraid-and-3ware) 

**Cannot create SafeStore encrypted volume or CacheCade volume**
- [Drive is encryption capable and I have a license key for SafeStore.](https://www.broadcom.com/support/knowledgebase/1211161504180/compatible-sed-self-encrypting-drives-with-lsi-safestore-for-fde) 
- [Cannot enable drive encryption or CacheCade.](https://www.broadcom.com/support/knowledgebase/1211161499936/activating-lsi-advanced-software-options) 
- [Compatibility list for gen 2 drive encryption.](https://www.broadcom.com/support/knowledgebase/1211161497914/lsi-megaraid-safestore-support-for-sas-and-sata-drives) 

**Unable to create RAID 5 or 6, need activation key**
- [RAID 5 and 6 are not an option, only RAID 0, 1 and 10.](https://www.broadcom.com/support/knowledgebase/1211161493172/unable-to-create-a-raid-5-with-8204elp-8208elp-8204xlp-8208xlp) 

**Unable to expand my drive group. It is greyed out**
- [Drive modification cannot always be done on all configurations.](https://www.broadcom.com/support/knowledgebase/1211161503168/how-to-expand-an-array-on-megaraid-controllers-adding-drives-to-) 

**Battery Backup error messages**
- [Battery error during first boot.](https://www.broadcom.com/support/knowledgebase/1211161504400/battery-hardware-missing-error-message-at-first-boot) 

**MegaRAID Storage Manager issues**

- [Login hangs.](https://www.broadcom.com/support/knowledgebase/1211161499212/megaraid-storage-manger-11120101-windows-2008-7) 
- [Unable to login.](https://www.broadcom.com/support/knowledgebase/1211161460135/i-am-unable-to-login-to-megaraid-storage-manager) 

**Email setup**
- [Email fails to send with gmail workaround.](https://www.broadcom.com/support/knowledgebase/1211161500177/megaraid-storage-manager-sending-email-notifications) 
- [Setup email alerts.](https://www.broadcom.com/support/knowledgebase/1211161496387/megaraid-storage-manager-msm-email-notification) 

**Unable to discover host**
- [No hosts are showing up after successful login.](https://www.broadcom.com/support/knowledgebase/1211161499345/megaraid-storage-manager-not-discovering-host) 

**Installation fails**
- Install packages for Ubuntu and Debian
  - [Installation workaround for Debian and Ubuntu.](https://www.broadcom.com/support/knowledgebase/1211161499345/megaraid-storage-manager-not-discovering-host) 

**MegaRAID Storage Manager- Vmware**
- [Installing and managing VMware hosts.](https://www.broadcom.com/support/knowledgebase/1211161496123/supporting-megaraid-storage-manager-on-the-vmware-esxi-operating) 

**MegaRAID documentation**

- **Conformance and certification**
  - RoHS statement for MegaRAID controllers:
    - [9380-8e](https://docs.broadcom.com/docs/12348890) 
    - [9280-8e](https://docs.broadcom.com/docs/12348855) 
    - [9260-8i](https://docs.broadcom.com/docs/12348852) 
    - [9261-8i](https://docs.broadcom.com/docs/12348850) 

- **CB certification**
  - [9260 and 9280](https://www.broadcom.com/support/knowledgebase/1211161499014/cb-certificate-and-report-for-9260-8i-9280-8e-and-9280-4i4e) 
  - Other certifications 

**Advanced software options- CacheCade and SafeStore Encryption**
- [Software activation information.](https://www.broadcom.com/support/knowledgebase/1211161499936/activating-lsi-advanced-software-options) 
- [SafeStore and CacheCade 30 day trial keys.](https://www.broadcom.com/support/knowledgebase/1211161498860/lsi-megaraid-advanced-software-trial-keys) 
- [Ordering part numbers for CacheCade pro 2.0.](https://www.broadcom.com/products/storage/raid-controllers/megaraid-cachecade-pro-software#specifications) 
- [Ordering part numbers for SafeStore Encryption.](https://www.broadcom.com/products/storage/raid-controllers/megaraid-safestore-software#specifications) 
- [SafeStore compatibility information.](https://www.broadcom.com/support/knowledgebase/1211161504180/compatible-sed-self-encrypting-drives-with-lsi-safestore-for-fde) 

**Other questions often answered Not in the User’s guide**
- [Migrating onboard OS drive to RAID 1 on RAID controller.](https://www.broadcom.com/support/knowledgebase/1211161461634/how-can-i-migrate-a-bootable-sata-drive-to-a-raid-1-bootable) 
- [Installing Linux drivers for MegaRAID.](https://www.broadcom.com/support/knowledgebase/1211161499234/installing-linux-drivers-for-megaraid-92xx-controllers) 
- [RAID controller and cable selection guide.](https://www.broadcom.com/support/knowledgebase/1211161505024/where-can-i-find-the-product-guide-and-cable-guide-)
